Disc upper part for mesh 20x20

Für die Filterung wurden keine Ergebnisse gefunden!
UPPER PART 86 w. hole 7.5mm, stainless steel 1.4404 (AISI 316L) UPPER PART 86 w. hole 7.5mm, stainless steel...
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M6 countersunk screws DIN 7991 / ISO 10642 for assembly stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 9mm, stainless steel 1.4404 (AISI 316L) UPPER PART 86 w. hole 9mm, stainless steel...
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M8 countersunk screws DIN 7991 / ISO 10642 for assembly Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 7.5mm, stainless steel 1.4301 (AISI 304) UPPER PART 86 w. hole 7.5mm, stainless steel...
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M6 countersunk screws DIN 7991 / ISO 10642 for assembly stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 9mm, stainless steel 1.4301 (AISI 304) UPPER PART 86 w. hole 9mm, stainless steel...
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M8 countersunk screws DIN 7991 / ISO 10642 for assembly stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 7.5mm, galvanic zinc UPPER PART 86 w. hole 7.5mm, galvanic zinc
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M8 countersunk screws DIN 7991 / ISO 10642 for assembly galvanized Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 9mm, galvanic zinc UPPER PART 86 w. hole 9mm, galvanic zinc
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M8 countersunk screws DIN 7991 / ISO 10642 for assembly galvanized Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 7,5mm, hot-dip galvanized UPPER PART 86 w. hole 7,5mm, hot-dip galvanized
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M6 countersunk screws DIN 7991 / ISO 10642 for assembly hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 9mm, hot-dip galvanized UPPER PART 86 w. hole 9mm, hot-dip galvanized
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M8 countersunk screws DIN 7991 / ISO 10642 for assembly hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
Zuletzt angesehen