1 von 2
Für die Filterung wurden keine Ergebnisse gefunden!
UPPER PART 83 M8, hot-dip galvanized UPPER PART 83 M8, hot-dip galvanized
Clip upper part for mesh pitch 22/25 mm deep in the grating Crossbar width at least 18 mm Use of M8 hexagon socket head cap screw screws DIN 912 / ISO 4762 for assembly Hot-dip galvanized acc. DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 83 M6, stainless steel 1.4404 (AISI 316L) UPPER PART 83 M6, stainless steel 1.4404 (AISI...
Clip upper part for mesh pitch 22/25 mm deep in the grating Crossbar width at least 18 mm Use of M6 hexagon socket head cap screw screws DIN 912 / ISO 4762 for assembly Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 83 M6, stainless steel 1.4301 (AISI 304) UPPER PART 83 M6, stainless steel 1.4301 (AISI...
Clip upper part for mesh pitch 22/25 mm deep in the grating Crossbar width at least 18 mm Use of M6 hexagon socket head cap screw screws DIN 912 / ISO 4762 for assembly Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 83 M6, hot-dip galvanized UPPER PART 83 M6, hot-dip galvanized
Clip upper part for mesh pitch 22/25 mm deep in the grating Crossbar width at least 18 mm Use of M6 hexagon socket head cap screw screws DIN 912 / ISO 4762 for assembly Hot-dip galvanized acc. DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 7.5mm, stainless steel 1.4404 (AISI 316L) UPPER PART 86 w. hole 7.5mm, stainless steel...
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M6 countersunk screws DIN 7991 / ISO 10642 for assembly stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 9mm, stainless steel 1.4404 (AISI 316L) UPPER PART 86 w. hole 9mm, stainless steel...
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M8 countersunk screws DIN 7991 / ISO 10642 for assembly Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 7.5mm, stainless steel 1.4301 (AISI 304) UPPER PART 86 w. hole 7.5mm, stainless steel...
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M6 countersunk screws DIN 7991 / ISO 10642 for assembly stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 9mm, stainless steel 1.4301 (AISI 304) UPPER PART 86 w. hole 9mm, stainless steel...
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M8 countersunk screws DIN 7991 / ISO 10642 for assembly stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 7.5mm, galvanic zinc UPPER PART 86 w. hole 7.5mm, galvanic zinc
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M8 countersunk screws DIN 7991 / ISO 10642 for assembly galvanized Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 9mm, galvanic zinc UPPER PART 86 w. hole 9mm, galvanic zinc
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M8 countersunk screws DIN 7991 / ISO 10642 for assembly galvanized Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 7,5mm, hot-dip galvanized UPPER PART 86 w. hole 7,5mm, hot-dip galvanized
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M6 countersunk screws DIN 7991 / ISO 10642 for assembly hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 9mm, hot-dip galvanized UPPER PART 86 w. hole 9mm, hot-dip galvanized
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M8 countersunk screws DIN 7991 / ISO 10642 for assembly hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 15, galvanized UPPER PART 15, galvanized
Clip upper part for mesh pitch 60/66/68 mm Cross bar width at least 31 mm Use of hexagon head screws DIN 933 M8 when mounting Galvanized acc. DIN EN 10346 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 29, stainless steel 1.4571 (AISI 316Ti) UPPER PART 29, stainless steel 1.4571 (AISI 316Ti)
Universal disc upper part for mesh pitches from 19 to 45 mm slightly raised overlay on grating Cross bar width at least 10 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 29, stainless steel 1.4404 (AISI 316L) UPPER PART 29, stainless steel 1.4404 (AISI 316L)
Universal disc upper part for mesh pitches from 19 to 45 mm slightly raised overlay on grating Cross bar width at least 10 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 29, stainless steel 1.4301 (AISI 304) UPPER PART 29, stainless steel 1.4301 (AISI 304)
Universal disc upper part for mesh pitches from 19 to 45 mm slightly raised overlay on grating Cross bar width at least 10 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 29, hot-dip galvanized UPPER PART 29, hot-dip galvanized
Universal disc upper part for mesh pitches from 19 to 45 mm slightly raised overlay on grating Cross bar width at least 10 mm Use of hexagon head screws DIN 933 M8 when mounting Hot-dip galvanized acc. DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 74, stainless steel 1.4571 (AISI 316Ti) UPPER PART 74, stainless steel 1.4571 (AISI 316Ti)
Clip upper part for FRP mesh pitch 38/40 mm Cross bar width at least 26 mm bar width in maximum 6 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 74, stainless steel 1.4404 (AISI 316L) UPPER PART 74, stainless steel 1.4404 (AISI 316L)
Clip upper part for FRP mesh pitch 38/40 mm Cross bar width at least 26 mm bar width in maximum 6 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4404 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 74, stainless steel 1.4301 (AISI 304) UPPER PART 74, stainless steel 1.4301 (AISI 304)
Clip upper part for FRP mesh pitch 38/40 mm Cross bar width at least 26 mm bar width in maximum 6 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 74, hot-dip galvanized UPPER PART 74, hot-dip galvanized
Clip upper part for FRP mesh pitch 38/40 mm Cross bar width at least 26 mm bar width in maximum 6 mm Use of hexagon head screws DIN 933 M8 when mounting Hot-dip galvanized acc. DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 28, stainless steel 1.4571 (AISI 316Ti) UPPER PART 28, stainless steel 1.4571 (AISI 316Ti)
Clip upper part for mesh pitch 41/44/45 mm Cross bar width at least 18 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 28, stainless steel 1.4301 (AISI 304) UPPER PART 28, stainless steel 1.4301 (AISI 304)
Clip upper part for mesh pitch 41/44/45 mm Cross bar width at least 18 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 28, stainless steel 1.4404 (AISI 316L) UPPER PART 28, stainless steel 1.4404 (AISI 316L)
Clip upper part for mesh pitch 41/44/45 mm Cross bar width at least 18 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 28, hot-dip galvanized UPPER PART 28, hot-dip galvanized
Clip upper part for mesh pitch 41/44/45 mm Cross bar width at least 18 mm Use of hexagon head screws DIN 933 M8 when mounting Hot-dip galvanized acc. DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 23S, stainless steel 1.4571 (AISI 316Ti) UPPER PART 23S, stainless steel 1.4571 (AISI...
Clip upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 22 mm Use of hexagon socket countersunk head screws DIN 7991 M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 23S, stainless steel 1.4404 (AISI 316L) UPPER PART 23S, stainless steel 1.4404 (AISI 316L)
Clip upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 22 mm Use of hexagon socket countersunk head screws DIN 7991 M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 23S, stainless steel 1.4301 (AISI 304) UPPER PART 23S, stainless steel 1.4301 (AISI 304)
Clip upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 22 mm Use of hexagon socket countersunk head screws DIN 7991 M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 23S, hot-dip galvanized UPPER PART 23S, hot-dip galvanized
Clip upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 22 mm Use of hexagon socket countersunk head screws DIN 7991 M8 when mounting Hot-dip galvanized acc. DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 23, stainless steel 1.4571 (AISI 316Ti) UPPER PART 23, stainless steel 1.4571 (AISI 316Ti)
Clip upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 12 mm Use of hexagon socket countersunk head screws DIN 7991 M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 23, stainless steel 1.4404 (AISI 316L) UPPER PART 23, stainless steel 1.4404 (AISI 316L)
Clip upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 12 mm Use of hexagon socket countersunk head screws DIN 7991 M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 23, stainless steel 1.4301 (AISI 304) UPPER PART 23, stainless steel 1.4301 (AISI 304)
Clip upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 12 mm Use of hexagon socket countersunk head screws DIN 7991 M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 23, hot-dip galvanized UPPER PART 23, hot-dip galvanized
Clip upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 12 mm Use of hexagon socket countersunk head screws DIN 7991 M8 when mounting Hot-dip galvanized acc. DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 22, stainless steel 1.4571 (AISI 316Ti) UPPER PART 22, stainless steel 1.4571 (AISI 316Ti)
Clip upper part for mesh pitch 33/34 mm Cross bar width at least 18 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 22, stainless steel 1.4404 (AISI 316L) UPPER PART 22, stainless steel 1.4404 (AISI 316L)
Clip upper part for mesh pitch 33/34 mm Cross bar width at least 18 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 22, hot-dip galvanized UPPER PART 22, hot-dip galvanized
Clip upper part for mesh pitch 33/34 mm Cross bar width at least 18 mm Use of hexagon head screws DIN 933 M8 when mounting Hot-dip galvanized acc. DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 22, stainless steel 1.4301 (AISI 304) UPPER PART 22, stainless steel 1.4301 (AISI 304)
Clip upper part for mesh pitch 33/34 mm Cross bar width at least 18 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 21, stainless steel 1.4571 (AISI 316Ti) UPPER PART 21, stainless steel 1.4571 (AISI 316Ti)
Safety clip upper part for mesh pitch 33/34 mm Cross bar width at least 26 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4571 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 21, stainless steel 1.4404 (AISI 316L) UPPER PART 21, stainless steel 1.4404 (AISI 316L)
Safety clip upper part for mesh pitch 33/34 mm Cross bar width at least 26 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4404 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 21, stainless steel 1.4301 (AISI 304) UPPER PART 21, stainless steel 1.4301 (AISI 304)
Safety clip upper part for mesh pitch 33/34 mm Cross bar width at least 26 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 21, hot-dip galvanized UPPER PART 21, hot-dip galvanized
Safety clip upper part for mesh pitch 33/34 mm Cross bar width at least 26 mm Use of hexagon head screws DIN 933 M8 when mounting Hot-dip galvanized acc. DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 18, stainless steel 1.4571 (AISI 316Ti) UPPER PART 18, stainless steel 1.4571 (AISI 316Ti)
Clip upper part for mesh pitch from 15 mm on With mesh pitch 15 mm maximum bearing bar width 3 mm Cross bar width at least 19 mm Use of slotted cheese head screws DIN 84 M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 18, stainless steel 1.4404 (AISI 316L) UPPER PART 18, stainless steel 1.4404 (AISI 316L)
Clip upper part for mesh pitch from 15 mm on With mesh pitch 15 mm maximum bearing bar width 3 mm Cross bar width at least 19 mm Use of slotted cheese head screws DIN 84 M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 18, stainless steel 1.4301 (AISI 304) UPPER PART 18, stainless steel 1.4301 (AISI 304)
Clip upper part for mesh pitch from 15 mm on With mesh pitch 15 mm maximum bearing bar width 3 mm Cross bar width at least 19 mm Use of slotted cheese head screws DIN 84 M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 18, hot-dip galvanized UPPER PART 18, hot-dip galvanized
Clip upper part for mesh pitch from 15 mm on With mesh pitch 15 mm maximum bearing bar width 3 mm Cross bar width at least 19 mm Use of slotted cheese head screws DIN 84 M8 when mounting Hot-dip galvanized acc. DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 15, stainless steel 1.4571 (AISI 316Ti) UPPER PART 15, stainless steel 1.4571 (AISI 316Ti)
Clip upper part for mesh pitch 60/66/68 mm Cross bar width at least 31 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 15, stainless steel 1.4404 (AISI 316L) UPPER PART 15, stainless steel 1.4404 (AISI 316L)
Clip upper part for mesh pitch 60/66/68 mm Cross bar width at least 31 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 15, stainless steel 1.4301 (AISI 304) UPPER PART 15, stainless steel 1.4301 (AISI 304)
Clip upper part for mesh pitch 60/66/68 mm Cross bar width at least 31 mm Use of hexagon head screws DIN 933 M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
1 von 2
Zuletzt angesehen