Für die Filterung wurden keine Ergebnisse gefunden!
HILTI X-MGR M60 Clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to a grating height 40 mm hot-dip galvanized Unmounted kit consisting of: HILTI X-MGR retaining flange Cylinder head screw DIN 912 M8x60, hot-dip galvanized Grating fastenings are currently not subject to CE standards, but must in accordance with the statutory provisions applicable to the application be used.
Prices after registration
SET UPPER PART 23S, LOWER PART 31, hot-dip... Mounted clamp set with upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 22 mm Use up to grating height 60 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 23S, hot-dip galvanized Lower part 31, hot-dip galvanized Countersunk head screw DIN 7991 M8x80, steel 8.8, galvanized Square nut DIN 557 M8, hot-dip...
Prices after registration
SET UPPER PART 23S, LOWER PART 31, hot-dip... Mounted clamp set with upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 22 mm Use up to grating height 50 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 23S, hot-dip galvanized Lower part 31, hot-dip galvanized Countersunk head screw DIN 7991 M8x70, steel 8.8, galvanized Square nut DIN 557 M8, hot-dip...
Prices after registration
SET UPPER PART 23S, LOWER PART 31, hot-dip... Mounted clamp set with upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 22 mm Use up to grating height 40 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 23S, hot-dip galvanized Lower part 31, hot-dip galvanized Countersunk head screw DIN 7991 M8x60, steel 8.8, galvanized Square nut DIN 557 M8, hot-dip...
Prices after registration
SET UPPER PART 23, LOWER PART 31, hot-dip... Mounted clamp set with upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 12 mm Use up to grating height 60 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 23, hot-dip galvanized Lower part 31, hot-dip galvanized Countersunk head screw DIN 7991 M8x80, steel 8.8, galvanized Square nut DIN 557 M8, hot-dip...
Prices after registration
SET UPPER PART 23, LOWER PART 31, hot-dip... Mounted clamp set with upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 12 mm Use up to grating height 50 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 23, hot-dip galvanized Lower part 31, hot-dip galvanized Countersunk head screw DIN 7991 M8x70, steel 8.8, galvanized Square nut DIN 557 M8, hot-dip...
Prices after registration
SET UPPER PART 23, LOWER PART 31, hot-dip... Mounted clamp set with upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 12 mm Use up to grating height 40 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 23, hot-dip galvanized Lower part 31, hot-dip galvanized Countersunk head screw DIN 7991 M8x60, steel 8.8, galvanized Square nut DIN 557 M8, hot-dip...
Prices after registration
SET UPPER PART 5, LOWER PART 47, hot-dip... Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 50 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 5, hot-dip galvanized Lower part 47, hot-dip galvanized Hexagon head screw DIN 933 M8x70, steel 4.8, hot-dip galvanized Square nut DIN 557 M8, hot-dip galvanized Grating fixtures are currently not subject...
Prices after registration
SET UPPER PART 5, LOWER PART 47, hot-dip... Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 20 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 5, hot-dip galvanized Lower part 47, hot-dip galvanized Hexagon head screw DIN 933 M8x50, steel 4.8, hot-dip galvanized Square nut DIN 557 M8, hot-dip galvanized Grating fixtures are currently not subject...
Prices after registration
SET UPPER PART 5, LOWER PART 31, hot-dip... Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 60 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 5, hot-dip galvanized Lower part 32, hot-dip galvanized Hexagon head screw DIN 933 M8x80, steel 4.8, hot-dip galvanized Square nut DIN 557 M8, hot-dip galvanized Grating fixtures are currently not subject...
Prices after registration
SET UPPER PART 5, LOWER PART 32, hot-dip... Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 40 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 5, hot-dip galvanized Lower part 32, hot-dip galvanized Hexagon head screw DIN 933 M8x60, steel 4.8, hot-dip galvanized Square nut DIN 557 M8, hot-dip galvanized Grating fixtures are currently not subject...
Prices after registration
SET UPPER PART 5, LOWER PART 32, hot-dip... Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 50 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 5, hot-dip galvanized Lower part 32, hot-dip galvanized Hexagon head screw DIN 933 M8x70, steel 4.8, hot-dip galvanized Square nut DIN 557 M8, hot-dip galvanized Grating fixtures are currently not subject...
Prices after registration
SET UPPER PART 5, LOWER PART 31, stainless... Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 60 mm Stainless steel 1.4404 (AISI 316L) Clamp set consists of: Upper part 5, stainless steel 1.4404 (AISI 316L) Lower part 31, stainless steel 1.4404 (AISI 316L) Hexagon head screw DIN 933 M8x80, stainless steel 1.4404 (AISI 316L) Square nut DIN 557 M8, stainless steel 1.4404 (AISI...
Prices after registration
SET UPPER PART 5, LOWER PART 31, stainless... Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 50 mm Stainless steel 1.4404 (AISI 316L) Clamp set consists of: Upper part 5, stainless steel 1.4404 (AISI 316L) Lower part 31, stainless steel 1.4404 (AISI 316L) Hexagon head screw DIN 933 M8x70, stainless steel 1.4404 (AISI 316L) Square nut DIN 557 M8, stainless steel 1.4404 (AISI...
Prices after registration
SET UPPER PART 5, LOWER PART 31, stainless... Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 40 mm Stainless steel 1.4404 (AISI 316L) Clamp set consists of: Upper part 5, stainless steel 1.4404 (AISI 316L) Lower part 31, stainless steel 1.4404 (AISI 316L) Hexagon head screw DIN 933 M8x60, stainless steel 1.4404 (AISI 316L) Square nut DIN 557 M8, stainless steel 1.4404 (AISI...
Prices after registration
SET UPPER PART 5, LOWER PART 31, stainless... Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 60 mm Stainless steel 1.4301 (AISI 304) Clamp set consists of: Upper part 5, stainless steel 1.4301 (AISI 304) Lower part 31, stainless steel 1.4301 (AISI 304) Hexagon head screw DIN 933 M8x80, stainless steel 1.4301 (AISI 304) Square nut DIN 557 M8, stainless steel 1.4301 (AISI 304)...
Prices after registration
SET UPPER PART 5, LOWER PART 31, stainless... Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 50 mm Stainless steel 1.4301 (AISI 304) Clamp set consists of: Upper part 5, stainless steel 1.4301 (AISI 304) Lower part 31, stainless steel 1.4301 (AISI 304) Hexagon head screw DIN 933 M8x70, stainless steel 1.4301 (AISI 304) Square nut DIN 557 M8, stainless steel 1.4301 (AISI 304)...
Prices after registration
SET UPPER PART 5, LOWER PART 31, stainless... Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 40 mm Stainless steel 1.4301 (AISI 304) Clamp set consists of: Upper part 5, stainless steel 1.4301 (AISI 304) Lower part 31, stainless steel 1.4301 (AISI 304) Hexagon head screw DIN 933 M8x60, stainless steel 1.4301 (AISI 304) Square nut DIN 557 M8, stainless steel 1.4301 (AISI 304)...
Prices after registration
SET UPPER PART 5, LOWER PART 31, hot-dip... Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 60 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 5, hot-dip galvanized Lower part 31, hot-dip galvanized Hexagon head screw DIN 933 M8x80, steel 4.8, hot-dip galvanized Square nut DIN 557 M8, hot-dip galvanized Grating fixtures are currently not subject...
Prices after registration
SET UPPER PART 5, LOWER PART 31, hot-dip... Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 50 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 5, hot-dip galvanized Lower part 31, hot-dip galvanized Hexagon head screw DIN 933 M8x70, steel 4.8, hot-dip galvanized Square nut DIN 557 M8, hot-dip galvanized Grating fixtures are currently not subject...
Prices after registration
SET UPPER PART 5, LOWER PART 31, hot-dip... Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 40 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 5, hot-dip galvanized Lower part 31, hot-dip galvanized Hexagon head screw DIN 933 M8x60, steel 4.8, hot-dip galvanized Square nut DIN 557 M8, hot-dip galvanized Grating fixtures are currently not subject...
Prices after registration
Zuletzt angesehen