1 von 2
Für die Filterung wurden keine Ergebnisse gefunden!
LOWER PART 54, stainless steel 1.4571 (AISI LOWER PART 54, stainless steel 1.4571 (AISI
Clamp for through-hole mounting with mesh pitch 38 mm Support on 2 bearing bars Clamping height 14 mm Use of screws M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 54, stainless steel 1.4404 (AISI LOWER PART 54, stainless steel 1.4404 (AISI
Clamp for through-hole mounting with mesh pitch 38 mm Support on 2 bearing bars Clamping height 14 mm Use of screws M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 54, stainless steel 1.4301 (AISI LOWER PART 54, stainless steel 1.4301 (AISI
Clamp for through-hole mounting with mesh pitch 38 mm Support on 2 bearing bars Clamping height 14 mm Use of screws M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 54, hot-dip galvanized LOWER PART 54, hot-dip galvanized
Clamp for through-hole mounting with mesh pitch 38 mm Support on 2 bearing bars Clamping height 14 mm Use of screws M8 when mounting Hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 47, stainless steel 1.4571 (AISI 316Ti) LOWER PART 47, stainless steel 1.4571 (AISI 316Ti)
Clamp for mesh pitch 15/21/22/33/38 mm Support on 2 bearing bars Clamping height 10 mm/15 mm Use of screws M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 47, stainless steel 1.4404 (AISI 316L) LOWER PART 47, stainless steel 1.4404 (AISI 316L)
Clamp for mesh pitch 15/21/22/33/38 mm Support on 2 bearing bars Clamping height 10 mm/15 mm Use of screws M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 47, stainless steel 1.4301 (AISI 304) LOWER PART 47, stainless steel 1.4301 (AISI 304)
Clamp for mesh pitch 15/21/22/33/38 mm Support on 2 bearing bars Clamping height 10 mm/15 mm Use of screws M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 47, hot-dip galvanized LOWER PART 47, hot-dip galvanized
Clamp for mesh pitch 15/21/22/33/38 mm Support on 2 bearing bars Clamping height 10 mm/15 mm Use of screws M8 when mounting Hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 46, stainless steel 1.4404 (AISI 316L) LOWER PART 46, stainless steel 1.4404 (AISI 316L)
Clamp for mesh pitch 19/20/22/25/38 mm Support on 2 bearing bars Clamping height 8 - 13 mm Use of screws M8 when mounting Stainless steel 1.4404 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 46, stainless steel 1.4571 (AISI 316Ti) LOWER PART 46, stainless steel 1.4571 (AISI 316Ti)
Clamp for mesh pitch 19/20/22/25/38 mm Support on 2 bearing bars Clamping height 8 - 13 mm Use of screws M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 46, stainless steel 1.4301 (AISI 304) LOWER PART 46, stainless steel 1.4301 (AISI 304)
Clamp for mesh pitch 19/20/22/25/38 mm Support on 2 bearing bars Clamping height 8 - 13 mm Use of screws M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 46, hot-dip galvanized LOWER PART 46, hot-dip galvanized
Clamp for mesh pitch 19/20/22/25/38 mm Support on 2 bearing bars Clamping height 8 - 13 mm Use of screws M8 when mounting Hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 42, stainless steel 1.4571 (AISI 316Ti) LOWER PART 42, stainless steel 1.4571 (AISI 316Ti)
Clamp for mesh pitch 33/34/38/40/51 mm Support on 2 bearing bars Clamping height 28 mm Use of screws M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 42, stainless steel 1.4404 (AISI 316L) LOWER PART 42, stainless steel 1.4404 (AISI 316L)
Clamp for mesh pitch 33/34/38/40/51 mm Support on 2 bearing bars Clamping height 28 mm Use of screws M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 42, stainless steel 1.4301 (AISI 304) LOWER PART 42, stainless steel 1.4301 (AISI 304)
Clamp for mesh pitch 33/34/38/40/51 mm Support on 2 bearing bars Clamping height 28 mm Use of screws M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 42, hot-dip galvanized LOWER PART 42, hot-dip galvanized
Clamp for mesh pitch 33/34/38/40/51 mm Support on 2 bearing bars Clamping height 28 mm Use of screws M8 when mounting Hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 40, stainless steel 1.4571 (AISI 316Ti) LOWER PART 40, stainless steel 1.4571 (AISI 316Ti)
Clamp for mesh pitch 11/15/17/21/22/24/25/30/33/34/41/44/45/51/55/60/66 mm Support on several bearing bars Use of screws M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 40, stainless steel 1.4404 (AISI 316L) LOWER PART 40, stainless steel 1.4404 (AISI 316L)
Clamp for mesh pitch 11/15/17/21/22/24/25/30/33/34/41/44/45/51/55/60/66 mm Support on several bearing bars Use of screws M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 40, stainless steel 1.4301 (AISI 304) LOWER PART 40, stainless steel 1.4301 (AISI 304)
Clamp for mesh pitch 11/15/17/21/22/24/25/30/33/34/41/44/45/51/55/60/66 mm Support on several bearing bars Use of screws M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 40, hot-dip galvanized LOWER PART 40, hot-dip galvanized
Clamp for mesh pitch 11/15/17/21/22/24/25/30/33/34/41/44/45/51/55/60/66 mm Support on several bearing bars Use of screws M8 when mounting Hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 39, hot-dip galvanized LOWER PART 39, hot-dip galvanized
Clamp for mesh pitch 34/38 mm Support on 2 bearing bars Clamping height 20 mm Use of screws M8 when mounting Hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 38, stainless steel 1.4571 (AISI 316Ti) LOWER PART 38, stainless steel 1.4571 (AISI 316Ti)
Clamp for mesh pitch 66/68 mm Support on 2 bearing bars Clamping height 20 mm/25 mm Use of screws M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 38, stainless steel 1.4404 (AISI 316L) LOWER PART 38, stainless steel 1.4404 (AISI 316L)
Clamp for mesh pitch 66/68 mm Support on 2 bearing bars Clamping height 20 mm/25 mm Use of screws M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 38, stainless steel 1.4301 (AISI 304) LOWER PART 38, stainless steel 1.4301 (AISI 304)
Clamp for mesh pitch 66/68 mm Support on 2 bearing bars Clamping height 20 mm/25 mm Use of screws M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 38, hot-dip galvanized LOWER PART 38, hot-dip galvanized
Clamp for mesh pitch 66/68 mm Support on 2 bearing bars Clamping height 20 mm/25 mm Use of screws M8 when mounting Hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 37, stainless steel 1.4571 (AISI 316Ti) LOWER PART 37, stainless steel 1.4571 (AISI 316Ti)
Clamp for mesh pitch 41/51/55/60/66/68 mm Support on 2 bearing bars Clamping height 28 mm/33 mm Use of screws M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 37, stainless steel 1.4404 (AISI 316L) LOWER PART 37, stainless steel 1.4404 (AISI 316L)
Clamp for mesh pitch 41/51/55/60/66/68 mm Support on 2 bearing bars Clamping height 28 mm/33 mm Use of screws M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 37, hot-dip galvanized LOWER PART 37, hot-dip galvanized
Clamp for mesh pitch 41/51/55/60/66/68 mm Support on 2 bearing bars Clamping height 28 mm/33 mm Use of screws M8 when mounting Hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 37, stainless steel 1.4301 (AISI 304) LOWER PART 37, stainless steel 1.4301 (AISI 304)
Clamp for mesh pitch 41/51/55/60/66/68 mm Support on 2 bearing bars Clamping height 28 mm/33 mm Use of screws M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 36, stainless steel 1.4571 (AISI 316Ti) LOWER PART 36, stainless steel 1.4571 (AISI 316Ti)
Clamp for mesh pitch 41/44/45 mm Support on 2 bearing bars Clamping height 20 mm/25 mm Use of screws M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 36, stainless steel 1.4404 (AISI 316L) LOWER PART 36, stainless steel 1.4404 (AISI 316L)
Clamp for mesh pitch 41/44/45 mm Support on 2 bearing bars Clamping height 20 mm/25 mm Use of screws M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 36, stainless steel 1.4301 (AISI 304) LOWER PART 36, stainless steel 1.4301 (AISI 304)
Clamp for mesh pitch 41/44/45 mm Support on 2 bearing bars Clamping height 20 mm/25 mm Use of screws M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 36, hot-dip galvanized LOWER PART 36, hot-dip galvanized
Clamp for mesh pitch 41/44/45 mm Support on 2 bearing bars Clamping height 20 mm/25 mm Use of screws M8 when mounting Hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 34S upstand hight 60mm, stainless steel 1.4571 (AISI 316Ti) LOWER PART 34S upstand hight 60mm, stainless...
Clamp for mesh pitch 33/34 mm Support on 2 bearing bars Additionally, support on 1 bearing bar up to thickness 9 mm Clamping height 55 mm Use of screws M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 34S upstand hight 60mm, stainless steel 1.4404 (AISI 316L) LOWER PART 34S upstand hight 60mm, stainless...
Clamp for mesh pitch 33/34 mm Support on 2 bearing bars Additionally, support on 1 bearing bar up to thickness 9 mm Clamping height 55 mm Use of screws M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 34S upstand hight 60mm, stainless steel 1.4301 (AISI 304) LOWER PART 34S upstand hight 60mm, stainless...
Clamp for mesh pitch 33/34 mm Support on 2 bearing bars Additionally, support on 1 bearing bar up to thickness 9 mm Clamping height 55 mm Use of screws M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 34S upstand hight 60mm, hot-dip galvanized LOWER PART 34S upstand hight 60mm, hot-dip...
Clamp for mesh pitch 33/34 mm Support on 2 bearing bars Additionally, support on 1 bearing bar up to thickness 9 mm Clamping height 55 mm Use of screws M8 when mounting Hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 33, stainless steel 1.4571 (AISI 316Ti) LOWER PART 33, stainless steel 1.4571 (AISI 316Ti)
Clamp with mounting aid for mesh pitch 33/34/38 mm Preferably usable for safety sets Support on 2 bearing bars Clamping height 18 mm/22.5 mm Use of screws M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 33, stainless steel 1.4404 (AISI 316L) LOWER PART 33, stainless steel 1.4404 (AISI 316L)
Clamp with mounting aid for mesh pitch 33/34/38 mm Preferably usable for safety sets Support on 2 bearing bars Clamping height 18 mm/22.5 mm Use of screws M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 33, stainless steel 1.4301 (AISI 304) LOWER PART 33, stainless steel 1.4301 (AISI 304)
Clamp with mounting aid for mesh pitch 33/34/38 mm Preferably usable for safety sets Support on 2 bearing bars Clamping height 18 mm/22.5 mm Use of screws M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 33, hot-dip galvanized LOWER PART 33, hot-dip galvanized
Clamp with mounting aid for mesh pitch 33/34/38 mm Preferably usable for safety sets Support on 2 bearing bars Clamping height 18 mm/22.5 mm Use of screws M8 when mounting Hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 32, stainless steel 1.4571 (AISI 316Ti) LOWER PART 32, stainless steel 1.4571 (AISI 316Ti)
Clamp for mesh pitch 22/33/34 mm Support on 2 bearing bars Additionally, support on 1 bearing bar up to thickness 4mm Clamping height 13.4 mm/17.7 mm Use of screws M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 32, stainless steel 1.4404 (AISI 316L) LOWER PART 32, stainless steel 1.4404 (AISI 316L)
Clamp for mesh pitch 22/33/34 mm Support on 2 bearing bars Additionally, support on 1 bearing bar up to thickness 4mm Clamping height 13.4 mm/17.7 mm Use of screws M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 32, stainless steel 1.4301 (AISI 304) LOWER PART 32, stainless steel 1.4301 (AISI 304)
Clamp for mesh pitch 22/33/34 mm Support on 2 bearing bars Additionally, support on 1 bearing bar up to thickness 4mm Clamping height 13.4 mm/17.7 mm Use of screws M8 when mounting Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 32, hot-dip galvanized LOWER PART 32, hot-dip galvanized
Clamp for mesh pitch 22/33/34 mm Support on 2 bearing bars Additionally, support on 1 bearing bar up to thickness 4 mm Clamping height 13.4 mm/17.7 mm Use of screws M8 when mounting Hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 31, hot-dip galvanized LOWER PART 31, hot-dip galvanized
Clamp for mesh pitch 22/33/34 mm Support on 2 bearing bars Clamping height 18 mm/22.5 mm Use of screws M8 when mounting Hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 31, stainless steel 1.4571 (AISI 316Ti) LOWER PART 31, stainless steel 1.4571 (AISI 316Ti)
Clamp for mesh pitch 22/33/34 mm Support on 2 bearing bars Clamping height 18 mm/22.5 mm Use of screws M8 when mounting Stainless steel 1.4571 (AISI 316Ti) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
LOWER PART 31, stainless steel 1.4404 (AISI 316L) LOWER PART 31, stainless steel 1.4404 (AISI 316L)
Clamp for mesh pitch 22/33/34 mm Support on 2 bearing bars Clamping height 18 mm/22.5 mm Use of screws M8 when mounting Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
1 von 2
Zuletzt angesehen