1 von 5
Für die Filterung wurden keine Ergebnisse gefunden!
L-Hook Bolt Type U 60, M8, galvanic zinc L-Hook Bolt Type U 60, M8, galvanic zinc
Prices after registration
L-Hook Bolt Type U 60, M8, hot-dip galvanized L-Hook Bolt Type U 60, M8, hot-dip galvanized
Prices after registration
UPPER PART 83 M8, hot-dip galvanized UPPER PART 83 M8, hot-dip galvanized
Clip upper part for mesh pitch 22/25 mm deep in the grating Crossbar width at least 18 mm Use of M8 hexagon socket head cap screw screws DIN 912 / ISO 4762 for assembly Hot-dip galvanized acc. DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 83 M6, stainless steel 1.4404 (AISI 316L) UPPER PART 83 M6, stainless steel 1.4404 (AISI...
Clip upper part for mesh pitch 22/25 mm deep in the grating Crossbar width at least 18 mm Use of M6 hexagon socket head cap screw screws DIN 912 / ISO 4762 for assembly Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 83 M6, stainless steel 1.4301 (AISI 304) UPPER PART 83 M6, stainless steel 1.4301 (AISI...
Clip upper part for mesh pitch 22/25 mm deep in the grating Crossbar width at least 18 mm Use of M6 hexagon socket head cap screw screws DIN 912 / ISO 4762 for assembly Stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 83 M6, hot-dip galvanized UPPER PART 83 M6, hot-dip galvanized
Clip upper part for mesh pitch 22/25 mm deep in the grating Crossbar width at least 18 mm Use of M6 hexagon socket head cap screw screws DIN 912 / ISO 4762 for assembly Hot-dip galvanized acc. DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
HILTI X-MGR M60 HILTI X-MGR M60
Clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to a grating height 40 mm hot-dip galvanized Unmounted kit consisting of: HILTI X-MGR retaining flange Cylinder head screw DIN 912 M8x60, hot-dip galvanized Grating fastenings are currently not subject to CE standards, but must in accordance with the statutory provisions applicable to the application be used.
Prices after registration
SET assembled, LOWER PART 31, SLOTTED SET assembled, LOWER PART 31, SLOTTED
Prices after registration
SET assembled, LOWER PART 31, SLOTTED SET assembled, LOWER PART 31, SLOTTED
Prices after registration
SET assembled, LOWER PART 31, SLOTTED SET assembled, LOWER PART 31, SLOTTED
Prices after registration
UPPER PART 86 w. hole 7.5mm, stainless steel 1.4404 (AISI 316L) UPPER PART 86 w. hole 7.5mm, stainless steel...
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M6 countersunk screws DIN 7991 / ISO 10642 for assembly stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 9mm, stainless steel 1.4404 (AISI 316L) UPPER PART 86 w. hole 9mm, stainless steel...
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M8 countersunk screws DIN 7991 / ISO 10642 for assembly Stainless steel 1.4404 (AISI 316L) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 7.5mm, stainless steel 1.4301 (AISI 304) UPPER PART 86 w. hole 7.5mm, stainless steel...
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M6 countersunk screws DIN 7991 / ISO 10642 for assembly stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 9mm, stainless steel 1.4301 (AISI 304) UPPER PART 86 w. hole 9mm, stainless steel...
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M8 countersunk screws DIN 7991 / ISO 10642 for assembly stainless steel 1.4301 (AISI 304) Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 7.5mm, galvanic zinc UPPER PART 86 w. hole 7.5mm, galvanic zinc
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M8 countersunk screws DIN 7991 / ISO 10642 for assembly galvanized Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 9mm, galvanic zinc UPPER PART 86 w. hole 9mm, galvanic zinc
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M8 countersunk screws DIN 7991 / ISO 10642 for assembly galvanized Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 7,5mm, hot-dip galvanized UPPER PART 86 w. hole 7,5mm, hot-dip galvanized
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M6 countersunk screws DIN 7991 / ISO 10642 for assembly hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
UPPER PART 86 w. hole 9mm, hot-dip galvanized UPPER PART 86 w. hole 9mm, hot-dip galvanized
Upper plate part for mesh pitch 22/25 mm very flat overhang on the grating Crossbar width at least 18 mm Use of M8 countersunk screws DIN 7991 / ISO 10642 for assembly hot-dip galvanized according to DIN EN ISO 1461 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
SET UPPER PART 23S, LOWER PART 31, hot-dip galvanized SET UPPER PART 23S, LOWER PART 31, hot-dip...
Mounted clamp set with upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 22 mm Use up to grating height 60 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 23S, hot-dip galvanized Lower part 31, hot-dip galvanized Countersunk head screw DIN 7991 M8x80, steel 8.8, galvanized Square nut DIN 557 M8, hot-dip...
Prices after registration
SET UPPER PART 23S, LOWER PART 31, hot-dip galvanized SET UPPER PART 23S, LOWER PART 31, hot-dip...
Mounted clamp set with upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 22 mm Use up to grating height 50 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 23S, hot-dip galvanized Lower part 31, hot-dip galvanized Countersunk head screw DIN 7991 M8x70, steel 8.8, galvanized Square nut DIN 557 M8, hot-dip...
Prices after registration
SET UPPER PART 23S, LOWER PART 31, hot-dip galvanized SET UPPER PART 23S, LOWER PART 31, hot-dip...
Mounted clamp set with upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 22 mm Use up to grating height 40 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 23S, hot-dip galvanized Lower part 31, hot-dip galvanized Countersunk head screw DIN 7991 M8x60, steel 8.8, galvanized Square nut DIN 557 M8, hot-dip...
Prices after registration
SET UPPER PART 23, LOWER PART 31, hot-dip galvanized SET UPPER PART 23, LOWER PART 31, hot-dip...
Mounted clamp set with upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 12 mm Use up to grating height 60 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 23, hot-dip galvanized Lower part 31, hot-dip galvanized Countersunk head screw DIN 7991 M8x80, steel 8.8, galvanized Square nut DIN 557 M8, hot-dip...
Prices after registration
SET UPPER PART 23, LOWER PART 31, hot-dip galvanized SET UPPER PART 23, LOWER PART 31, hot-dip...
Mounted clamp set with upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 12 mm Use up to grating height 50 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 23, hot-dip galvanized Lower part 31, hot-dip galvanized Countersunk head screw DIN 7991 M8x70, steel 8.8, galvanized Square nut DIN 557 M8, hot-dip...
Prices after registration
SET UPPER PART 23, LOWER PART 31, hot-dip galvanized SET UPPER PART 23, LOWER PART 31, hot-dip...
Mounted clamp set with upper part mounted over 2 cross bars Mesh width at least 30 mm Cross bar pitch in maximum 12 mm Use up to grating height 40 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 23, hot-dip galvanized Lower part 31, hot-dip galvanized Countersunk head screw DIN 7991 M8x60, steel 8.8, galvanized Square nut DIN 557 M8, hot-dip...
Prices after registration
SET UPPER PART 5, LOWER PART 47, hot-dip galvanized SET UPPER PART 5, LOWER PART 47, hot-dip...
Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 50 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 5, hot-dip galvanized Lower part 47, hot-dip galvanized Hexagon head screw DIN 933 M8x70, steel 4.8, hot-dip galvanized Square nut DIN 557 M8, hot-dip galvanized Grating fixtures are currently not subject...
Prices after registration
SET UPPER PART 5, LOWER PART 47, hot-dip galvanized SET UPPER PART 5, LOWER PART 47, hot-dip...
Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 20 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 5, hot-dip galvanized Lower part 47, hot-dip galvanized Hexagon head screw DIN 933 M8x50, steel 4.8, hot-dip galvanized Square nut DIN 557 M8, hot-dip galvanized Grating fixtures are currently not subject...
Prices after registration
SET UPPER PART 5, LOWER PART 31, hot-dip galvanized SET UPPER PART 5, LOWER PART 31, hot-dip...
Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 60 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 5, hot-dip galvanized Lower part 32, hot-dip galvanized Hexagon head screw DIN 933 M8x80, steel 4.8, hot-dip galvanized Square nut DIN 557 M8, hot-dip galvanized Grating fixtures are currently not subject...
Prices after registration
SET UPPER PART 5, LOWER PART 32, hot-dip galvanized SET UPPER PART 5, LOWER PART 32, hot-dip...
Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 40 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 5, hot-dip galvanized Lower part 32, hot-dip galvanized Hexagon head screw DIN 933 M8x60, steel 4.8, hot-dip galvanized Square nut DIN 557 M8, hot-dip galvanized Grating fixtures are currently not subject...
Prices after registration
SET UPPER PART 5, LOWER PART 32, hot-dip galvanized SET UPPER PART 5, LOWER PART 32, hot-dip...
Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 50 mm Hot-dip galvanized acc. DIN EN ISO 1461 Clamp set consists of: Upper part 5, hot-dip galvanized Lower part 32, hot-dip galvanized Hexagon head screw DIN 933 M8x70, steel 4.8, hot-dip galvanized Square nut DIN 557 M8, hot-dip galvanized Grating fixtures are currently not subject...
Prices after registration
UPPER PART 15, galvanized UPPER PART 15, galvanized
Clip upper part for mesh pitch 60/66/68 mm Cross bar width at least 31 mm Use of hexagon head screws DIN 933 M8 when mounting Galvanized acc. DIN EN 10346 Grating fixtures are currently not subject to CE standards but must comply with the legal requirements applicable to the application.
Prices after registration
SET UPPER PART 5, LOWER PART 31, stainless steel 1.4404 (AISI 316L) SET UPPER PART 5, LOWER PART 31, stainless...
Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 60 mm Stainless steel 1.4404 (AISI 316L) Clamp set consists of: Upper part 5, stainless steel 1.4404 (AISI 316L) Lower part 31, stainless steel 1.4404 (AISI 316L) Hexagon head screw DIN 933 M8x80, stainless steel 1.4404 (AISI 316L) Square nut DIN 557 M8, stainless steel 1.4404 (AISI...
Prices after registration
SET UPPER PART 5, LOWER PART 31, stainless steel 1.4404 (AISI 316L) SET UPPER PART 5, LOWER PART 31, stainless...
Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 50 mm Stainless steel 1.4404 (AISI 316L) Clamp set consists of: Upper part 5, stainless steel 1.4404 (AISI 316L) Lower part 31, stainless steel 1.4404 (AISI 316L) Hexagon head screw DIN 933 M8x70, stainless steel 1.4404 (AISI 316L) Square nut DIN 557 M8, stainless steel 1.4404 (AISI...
Prices after registration
SET UPPER PART 5, LOWER PART 31, stainless steel 1.4404 (AISI 316L) SET UPPER PART 5, LOWER PART 31, stainless...
Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 40 mm Stainless steel 1.4404 (AISI 316L) Clamp set consists of: Upper part 5, stainless steel 1.4404 (AISI 316L) Lower part 31, stainless steel 1.4404 (AISI 316L) Hexagon head screw DIN 933 M8x60, stainless steel 1.4404 (AISI 316L) Square nut DIN 557 M8, stainless steel 1.4404 (AISI...
Prices after registration
SET UPPER PART 5, LOWER PART 31, stainless steel 1.4301 (AISI 304) SET UPPER PART 5, LOWER PART 31, stainless...
Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 60 mm Stainless steel 1.4301 (AISI 304) Clamp set consists of: Upper part 5, stainless steel 1.4301 (AISI 304) Lower part 31, stainless steel 1.4301 (AISI 304) Hexagon head screw DIN 933 M8x80, stainless steel 1.4301 (AISI 304) Square nut DIN 557 M8, stainless steel 1.4301 (AISI 304)...
Prices after registration
SET UPPER PART 5, LOWER PART 31, stainless steel 1.4301 (AISI 304) SET UPPER PART 5, LOWER PART 31, stainless...
Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 50 mm Stainless steel 1.4301 (AISI 304) Clamp set consists of: Upper part 5, stainless steel 1.4301 (AISI 304) Lower part 31, stainless steel 1.4301 (AISI 304) Hexagon head screw DIN 933 M8x70, stainless steel 1.4301 (AISI 304) Square nut DIN 557 M8, stainless steel 1.4301 (AISI 304)...
Prices after registration
SET UPPER PART 5, LOWER PART 31, stainless steel 1.4301 (AISI 304) SET UPPER PART 5, LOWER PART 31, stainless...
Mounted clamp set for mesh 33/34 mm Cross bar width at least 26 mm Use up to grating height 40 mm Stainless steel 1.4301 (AISI 304) Clamp set consists of: Upper part 5, stainless steel 1.4301 (AISI 304) Lower part 31, stainless steel 1.4301 (AISI 304) Hexagon head screw DIN 933 M8x60, stainless steel 1.4301 (AISI 304) Square nut DIN 557 M8, stainless steel 1.4301 (AISI 304)...
Prices after registration
HEXAGON HEAD SCREW DIN 933 / ISO 4017 M8x60 HEXAGON HEAD SCREW DIN 933 / ISO 4017 M8x60
Prices after registration
SLOTTED MUSHROOM HEAD SCREW M8x80 SLOTTED MUSHROOM HEAD SCREW M8x80
Prices after registration
SLOTTED MUSHROOM HEAD SCREW M8x70 SLOTTED MUSHROOM HEAD SCREW M8x70
Prices after registration
SLOTTED MUSHROOM HEAD SCREW M8x60 SLOTTED MUSHROOM HEAD SCREW M8x60
Prices after registration
HEXAGON HEAD SCREW DIN 933 / ISO 4017 M8x100 HEXAGON HEAD SCREW DIN 933 / ISO 4017 M8x100
Prices after registration
HEXAGON HEAD SCREW DIN 933 / ISO 4017 M8x80 HEXAGON HEAD SCREW DIN 933 / ISO 4017 M8x80
Prices after registration
1 von 5
Zuletzt angesehen